K-edge K13-001 Manuel d'utilisateur télécharger pdf

Road Chain Catcher Installation Instructions

(K13-001, K13-006, K13-001-SL1, K13-001-SL2)

Description:

The K-Edge Road Chain Catcher series is designed to eliminate chain drop on the lowest chainring due to hard shifts, cross-chain

shifting and or rough terrain while riding.

Compatibility:

The K13-001 Road Chain Catcher series is designed to fit braze-on front derailleur mounts only with a Double chainring. The K13-

006 This includes framesets with braze-on mounts and seat tube clamps that accept braze-on derailleur’s.

The K13-001-SL1 Road Chain Catcher series is designed to fit braze-on Shimano and Campagnolo front derailleur’s only.

The K13-001-SL2 Road Chain Catcher series is designed to fit braze-on SRAM front derailleur’s only.

Warnings:

All K-Edge products are to be installed by a professional bike mechanic.

These instructions are generalized to accommodate a wide ranges of setups for a bike. If your setup does not match what is being

described, take extra care in the process of your setup and contact K-Edge Support if you have any questions.

Improper installation of any K-Edge product or use outside of its design intentions could lead not only to damaging the bike but could

also cause personal injury to the rider.

1 2 3 4

Page 1

Road Chain Catcher Installation Instructions (K13-001, K13-006, K13-001-SL1, K13-001-SL2) Description: The K-Edge Road Chain Catcher series is

Parts Included:  K13-001 & K13-006:  1x Chain Catcher  1x M5 x 22.5 mm socket head stainless steel bolt  1x M5 x 25 mm socket head stainl

Page 3

3. Position the front derailleur in correct position with the chainring and align the lower arm of the chain catcher as 'vertical' (parall

Troubleshooting:  Chain drops even though chain catcher is installed. o Check the chain catcher for proper adjustment. o Check the neck of the c

Modèles reliés K13-006 | K13-001-SL1 | K13-001-SL2 |

Pas de commentaire